How To Clean Lens Filter - Different Kinds
Are you a photographer and are curious about how to clean lens filters? If so, have you ever noticed how difficult it is to take a good photo with an old or dirty lens filter? Lens filters are what protect your lens from any dust or debris that might be in the air.
They also help reduce the light intensity coming into your camera which can save your battery life too! Did you know that cleaning them is actually pretty easy and only takes about 10 minutes of time every few months?
You don’t need expensive products either, just some simple items found around the house. Now keep reading for our step by step guide on how to clean lens filters.
Lens filters are an essential part of photography. They will help protect your camera lens from getting scratched and also can be used to make some shots look great. But what do you do if the filter gets dirty or dusty? Well, there are a few things that you can try out before giving up on it.
What is a lens filter?
A lens filter is a piece of equipment, most often made from glass or resin, which screws onto the end of your camera’s lens. When attached, they alter how light passes through and can thus give you different results for things like colour and contrast.
A clear example would be a polarizing filter which cuts out reflections and glare to allow you to see through water or glass.
What are the different kinds of lens filters?
There are many kinds of lens filters; some common ones include UV (ultraviolet), ND (neutral density) and CPL (circular polarized). A lot of different types can be found on amazon like this one.
How to clean the lens filter?
- Take a small quantity of mild soap water and clean the filter thoroughly with this solution.
- Make use of a cotton piece to clean the extra dirt particles on the lens filter.
- Use some soft sponge pieces to remove the dirt from the lens filter, rub it in circular motions, and then wipe it with dry cotton or soft cloth.
- Use a lens pen to clean the lens filter with ease and simplicity.
- Here are the steps on How To Clean Lens Filter:
- After using your filters for a long time, they get dirty and dusty; what you can do is use a blower to remove dust particles on the surface of the filter, then apply lens cleaning liquid on it and finally use tissue paper to clean it.
- You can also use a lens cleaning solution for this purpose which you will get in the market near the camera accessory section.
- To clean your lens filter, take some mild fluid detergent, mix it with water into a satisfactory solution, dip a cotton piece into this solution (do not soak), and rub it gently on the filter.
- Gently brush the area with a soft-bristle toothbrush to remove stubborn dirt particles.
- Take some prepared solution made up of water and white vinegar, then dip a cotton piece into it and squeeze it to absorb the mixture well. Then use this wet cotton piece to clean your lens filter in gentle upward strokes or circles.
- Use lens paper to clean the filter edge equally and ensure you remove all residues of cleaning fluid.
- To protect your lens filter from dust, dirt and scratches, use a UV filter which will save your lens filter from getting damaged or broken or scratched etc., also make it look new always.
- For camera filters, first check how much dust is on the lens filter and if there’s a lot of it, then try using a blower to remove as much as possible from the surface.
- Now, apply some cleaning fluid or lighter fluid to tissue or lens tissues and gently rub it over the entire body of the lens filter until the dirt, grease and oil from the filter are entirely removed.
- Then gently wipe off any remaining fluid or dirt with clean tissue or lens tissues to complete the process.
- In some cases, you might want to soak your lens filter in lighter fluid for a longer time before wiping it down if it’s filthy, but make sure not to soak it in lighter fluid for too long, or the filter will start to disintegrate.
- For lenses without detachable filters, you can use a unique blower made for photographic equipment that allows you to reach every lens area without needing to touch it with your hands physically. You can also use canned air or compressed air to blow out the dirt on your lens filter.
- If you’re using a high-quality lens, you can also use specially formulated lens fluid meant for cleaning photographic gear without any of the ingredients that might damage expensive camera equipment.
- You can make use of a cotton earbud or cotton piece dipped in alcohol or lighter fluid to clean the dust particles on the filter.
- Use a lens brush to remove dirt and dust from your lens filter and use a soft tissue to wipe it clean.
- Always remember that before cleaning your lens filter, make sure it has no oil or grease smears on it because if you try to clean an oily surface using alcohol or lighter fluid, you’re just going to smear the dirt around.
- You can use a special lens filter cleaner kit available in the market, which contains fluid for cleaning the lens filter and comes with a soft brush to remove dirt from your lens filters surface gently.
- Make sure you have removed all dust particles from the surface of the lens filter before cleaning it.
All these methods can be used to clean lens filters, and you can try all or any of the methods as per your requirements. If you follow some precautions like avoiding applying pressure during cleaning, taking care not to scratch glass, etc., it will suit your lens filter and make it clear and looks like new always.
Q: What is a UV filter?
A: The ultraviolet or UV filter is mainly used to protect the lens of the camera. The most common problem with using camera lenses in any outdoor photography is that they are prone to getting scratches and dirt because they are exposed to elements like dust, sand, mud, water, etc., while you are shooting.
Thus, to protect the lens from any damage, you should always use a UV filter to cover it. Though the UV filter does not affect the image quality directly, using a filter can save your lens from dirt and scratches.
Q: What is a Polarizer Lens Filter?
A: As its name suggests, it is a filter that helps in polarizing the light waves. It does this by allowing only specific vibrations through its surface while blocking out others. This creates dark blue skies with clearly defined clouds and enhances the contrast between any two subjects in direct line of sight of each other by eliminating unwanted reflections on water surfaces, etc.
Q: What is the use of Graduated and Solid Neutral Density (ND)?
A: The purpose of a graduated neutral density filter is to reduce exposure in half for the brighter areas of an image without affecting the darker areas. It works by darkening part of your frame, often the sky. This can be used to expose a bright sky better while still maintaining proper exposure in the rest of your image.
Q: What are P-Z ND?
A: They are neutral density filters with a specific power to stop light from entering the lens. The best part about P-Z ND filters is that they allow you to choose any strength between 1 and 1000. Some of the standard applications include controlling depth of field in landscape photography and motion blur in any moving subject